Barbecue grease can be cleaned off by using hot water and detergent. Let the detergent and water mixture remain on the affected surface for about five minutes before scrubbing it with a brush.
use bread and grease
To clean gas off a cement sidewalk, pour kitty litter over the stain. Sweep up the kitty litter once it absorbs the gas. Mix laundry detergent that works well on grease, with water until if forms a paste. Pour this paste over the stain and let it sit for several hours. Rinse the area with a garden hose.
You can use a paper towel to dry off most of the grease. You can then use soap and water to clean off the rest of the grease.
Carefully flip the covers off them so you can see the grease on the balls. Now wash this grease off with gasoline using a small paintbrush. When all the grease is gone, re-grease them with new grease and put the covers back on.
Clean it off with carb cleaner.Clean it off with carb cleaner.
The best way to clean silicone grease off of a car door is to buy some WD-40, this multipurpose cleaner is perfect for the job and can be bought at Walmart.
You can clean candle grease off stone by sprinkling some cornstarch on the stain and allowing it to set for about 24 hours. After this time, scrub the stain with hot, soapy water. Rinse well and buff dry.
Ammonia. That will cut through the grease and clean the window.
You can usually just use disinfectant, soap and bleach and that should get it out.
The best way to clean any type of stain off cement would be to use soap, hot water or a high pressure hose. In worst case scenarios, a scrub brush and stain lifting solution may be needed.
If the coping is made out of cement as well, VERY carefully use a sanding block to remove the cement spots, repainting will probably be necessary unless you have the hands of a surgeon.
You can grease your pogo stick with lubricants such as silicone grease or white lithium grease. These are commonly used to reduce friction and enhance the performance of the pogo stick. Make sure to clean the old grease off first before applying a fresh coat.