Honestly I don't think you CAN get linseed oil off of anything. I know people who have found dried linseed oil paint in their hair 2 months (and dozens of showers) after leaving a jobsite. Linseed oil does one thing very well- it permiates and infiltrates most any surface it comes into contact- that is why it is such a good preservative for wood, masonry and even metal. Geting it off your skin is tough enough using paint thinners, turpentine, etc, and really you're just diluting it (oh, and it's being partially absorbed into your skin too).
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"
It's used to clean sea creatures after an oil spill, so I think it's safe for your concrete.
you need to have a ''keyway''---that is a groove in the base concrete,can be cut in if concrete has set,if not set,oil a 2x4lightly(lightly) & imbed it into the base concrete flush.
CONCRETE RESIDUE RUNOFF Contact the concrete contractor and have them clean up their mess. Asa professional contractor, that is his responsibility.
Yes, you can. You should clean the dry concrete with water and a brush first, and you should use a bonding agent (available pretty much anywhere you buy concrete) for optimal adhesion. You may also wish to add reinforcement such as rebar.
Boiled linseed oil is used as a preservative for concrete and wood. It is also used as an ingredient in paints, varnishes, and stains.
Linseed oil is a traditional PRESERVATIVE and has been used for centuries for concrete, masonry, wood and metal. You would mix it 1 parts linseed to 2 parts turpentine (not mineral spirits), but the mixture would vary. You want to used boiled linseed oil, not raw linseed oil (check the label). Note this is not a SEALANT but a preservative- if you are doing your garage or basement floor, try something else! Also be careful- the tools and rags you use can spontaneously combust (i.e.: burst into flame, no kidding!) when being used with linseed oil. Check the Wikipedia page for details under "Linseed Oil"
Yes. Cleaning with it can be done by including one part vinegar. Conditoning the leather can be done by simply using the linseed oil.
why i linseed oil not used on oil stones
Double boiled linseed oil contains extra chemical additives that boiled linseed oil does not have. These chemical are added to help with the drying process.
We use linseed oil because it soaks into the the bat and makes it moist and knocking in becomes much easier but make sure to use raw linseed oil and not boiled linseed oil. The bat does not soak boiled linseed oil. Raw linseed oil not only increases the life of the bat but also makes the performance of the bat better.
Linseed oil does not damage paint. Linseed oil is used along with turpentine in oil paints as a type of paint thinner. Linseed oil extends the life of oil paint, makes it easier to thin out, control the paint and paint layers.
National Linseed Oil Trust ended in 1920.
National Linseed Oil Trust was created in 1885.
For painting purposes, linseed oil is sometimes thinned with turpentine.
Linseed oil is a product of the flax plant. Linseed oil has both medicinal and household uses Woodworkers use linseed oil to preserve and protect finished wood products. It can even be used to treat wood floors.
I doubt that Linseed Oil is generally described as noxious. It does not hurt, injure or corrupt. Many would consider the odour to be pleasant