answersLogoWhite

0


Best Answer

a vacuum cleaner with a very narrow attachment on the end of the hose,rags,tooth brush that is what i'd suggest.oh yeah do it as a family outside in the sun or if it's raining then in the garage.it makes a great family project.then everyone can say they helped make the minivan clean and they will all help keep it clean.good luck and God Bless You. :-D

User Avatar

Wiki User

10y ago
This answer is:
User Avatar
More answers
User Avatar

Anonymous

Lvl 1
3y ago

BeltBelt from the partake off to the deck

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you clean minivan sliding door tracks?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the best product for cleaning the tracks on sliding glass doors?

The tracks on a sliding glass door are best cleaned with a brush and mild detergent. You want to let it dry well before closing the door. Cleaning the tracks on a sliding glass door can seem like a dirty job, but it is actually easier than it may seem. To clean and lubricate the track for sliding doors or windows. Spraying WD40 on the tracks after vaccuming will aid in smoothing out the glide on the door. Remove grime with brush or cloth and vacuum again if necessary.


How do you fix sliding glass doors which do not slide?

1- Clean Tracks 2- Grease Tracks 3-Replace Rollers and Tracks There are also adjusting screws located on the doors to lower and higher the rollers. They are located on the edge of the door near the bottom and near the top. You can try that also.


How do you fix a 95 Chevy Lunmina Minivan power sliding door after it was jammed with a seatbelt?

REmove the fuse for a minute according to the owners manual.


How do you clean door jams of a sliding door?

To clean the door jams on a sliding door begin by vacuuming the door track and door jams. Then use a soap and water mixture and wipe down the door jam. Use a sponge or old toothbrush to get in to the small areas. Use an old towel to dry the track and door jam.


How to fix passenger sliding door?

The passenger sliding door of a Ford Windstar LX needs frequent cleaning and checking of the rubbers to prevent jamming. If a door jams a lot during sliding, take out the rubber linings and clean them up before re-attaching.


How do I fix a driver side power sliding door on a 2005 Chrysler Town and Country Minivan when the door has a functional motor but always gets stuck about 6-in from closing and 6-in after opening?

That usually is an indication of a broken wire in the door harness.


What do you need to check on the sliding side door on a 96 ford aerostar to see why the door drops after opening it?

A person will typically need to check the fuse and rails on the sliding door of a 96 Ford Aerostar fan to see why the door drops after opening. If the door is out of its tracks or the bolts have become lose, it will often drop when operated.


What type of sliding door hardware is needed to install a sliding glass door?

You will need handles, door tracks along with a lot of other things. Here is all you will need. http://www.allaboutdoors.com/index.php?cPath=74 I would like to buy a shower door 44 x 56. Where can I get one


How do you convert a manual sliding door with a power sliding door?

Sell the car without power sliding door , and buy one with.


How do you clean a contact pad on power sliding door on Oldsmobile silhouette?

Clean corrosion off contacts with fine steel woll, sandpaper, etc.


How do you fix the sliding door on a 1995 Dodge Caravan?

I have found that usually the problem is the rollers freeze up on the door. You can take the door off by taking off the trim piece above the track with a phillip screwdriver. Take the door off by removing all the small bolts holding the 3 bracket arms connecting to the door. Clean and grease up the rollers, spray the tracks with WD-40. Reassemble. Done.


How do you fix a sliding door that won't close on a windstar?

My mother in law had this problem. Turned out that one of the kids had shoved a pencil into the track at the bottom of the door opening. I took this out and it works fine now. Also if the door is hard to slide you can oil the rollers. There are three different slides(top,middle,and bottom of door. Clean the gunk out of the tracks and then I use a good silicone spray. It slides easily now.