Want this question answered?
Try Gunk High Mileage Motor Flush to clean engine and Bars 2 Part Engine Fix to restore engine performance.
You can make it easier to get Gelatin out of a mold by coating the mold with a very thin layer of vegetable oil before pouring in the liquid gelatin. You can also put the mold briefly in lukewarm water to loosen the gelatin from the mold.
This can happen on a high compression engine (especially diesel) when the oil is not changed often enough. The fuel blow-by from the rings causes fuel to mix with the oil and "coke up" , creating oil that looks almost like asphalt.
Remove the oil pan from the engine and clean it with kerosene.
In an engine, the oil filter, but only for a limited time.
Assuming you mean oil pump, changing the engine oil and oil filter on a regular basis with quality motor oil will help keep the internal engine parts as clean as possible.
Oil contains detergents that clean your engine and suspend soot, deposits, & dirt in the oil. The air and oil filters remove most of the larger particles but some get in the engine and stay suspended in the oil which causes it to turn black. Oil is not only a lubricant and helps cool the engine, but it also keeps the engine clean.
You might have to much oil in the engine. Check oil. Clean spark plugs. (remove and use sand paper to clean)
if your grout had not been seal then it will be hard to clean and if you clean with acid the grout will be change color.
Not far, anyway. The engine flush is not engine oil ... its only purpose is to, hopefully, clean the inside of the engine areas. That's why it's called "Engine Flush" and not "Engine Oil". Get it out and put the new oil in soon.
Drain out engine oil out, replace oil plug at the bottom of engine, pour in same amount of diesel let it stand 10mns, drain it and refill with engine oil.
"Trol-o-clean" Brand cleansers and lingerie