Have the codes read by an OBDII code scanner and repair whatever is wrong.
auto parts stores often do it for free but use only basic readers and make recommendations based on what it says, for a proper troubleshooting see a licenced mechanic.
Probably none, Service engine is normally an indicator the a scheduled maintenance interval has been met. Check your owners manual for a list of them, once performed check with your local auto parts store for an OBDII reader that can clear the light. A repair facility or dealer wil clear it for you after they perform the maintenance.
Trying to clear the check engine light in a Kia Sorento yourself is not recommended. The check engine light could indicate a serious problem and the car should be inspected by someone qualified.
I clear the check engine light with a Scangauge II. But most ODB-II devices can read and clear the code.
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
After repairing the cause of the code, you clear the code with a scan tool.
usually the brake fluid reservoir is clear and therefore you will see the level of the fluid. if not the lid will have a level indicator.
You can disconnect the battery for about 5 minutes and this will clear the check engine codes stored in the computer. If the problem that caused the code has not been repaired the check engine code will just happen again. The only way to get the check engine light to not be on is to repair the problem then clear the codes.
Just push in the clock adjuster and start engine hold down for 12 seconds it will clear
A scan tool is required to clear the check engine light. If the failure is not repaired, the light will return.
No, a person cannot just clean a check engine light to pass inspection. The issue causing the check engine light must be dealt with and fixed.
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
it is clear.