Use a C clamp to push the piston out of the way to remove and also to place back on rotor.
You can use a large C-Clamp to compress the caliper piston.
If the emergency brake is not connected to the caliper use a "c" Clamp If the emergency brake is connected to that caliper a special tool (not expensive available at Sears or auto parts) is needed Caliper is threaded. Turn Clockwise to compress
If the emergency brake is not connected to the caliper use a "c" Clamp If the emergency brake is connected to that caliper a special tool (not expensive available at Sears or auto parts) is needed Caliper is threaded. Turn Clockwise to compress
C or G clamps.
You will need a caliper rewinding tool
If it is the front brake use a "C" clamp to retract piston If it is the rear and the parking brake is used by this caliper piston is threaded and a special tool (not expensive) available at Sears or auto parts to "screw" piston into caliper body
It requires a special tool to turn and compress the piston in at the same time.
AnswerThere is not enough information in your question. A cylinder piston you do not compress, you compress the rings in the piston. There are pistons in the brake system. There is no way of knowing the problem without being more specific.I'm assuming you mean the caliper piston. If it can't be compressed, replace the caliper.
Get a 4 Inch C Clamp Leave the Pad In The Caliper On The Plunger Side Open The Clamp Wide enough To Clamp on The Back Of Caliper and Pad. It should Easily compress. However, as these are rear disc, the emergency brake is connected as well. A C clamp will not work in this situation because the piston caliper is threaded and has to be retracted by turning the piston caliper with a special tool that can be gotten at most auto parts for around 10-15 dollars. Make sure the cap is off the master cylinder reservoir. Not difficult.
Use a "c" clamp to fully compress piston into caliper body
The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper. The teves caliper is a single piston disc brake caliper and the akebono caliper is a dual piston disc brake caliper.
# Preparation For Brake Pad Replacement # Remove the Wheel # Unbolt the Caliper # Remove the Old Brake Pads # Compress the Brake Piston # Re-Install the Brake Caliper