Want this question answered?
The input to the earphones is a a analog signal i.e., electrically generated analog signal.
Analog Multiplexer - Two analog signals as the input, one analog signal as the output, output is the product of the two inputs.
The basic elements in digital signal processing are an analog to digital converter, digital signal processor, and digital to analog converter. This process can take an analog input signal, convert it to digital for processing and offer an analog output.
The input or output of a continuously variable signal within a designated range is a sampled data or a feedback system. This accepts limited analog signal and encodes.
Yes, the microphone or line in -input converts your analog signal into digital.
No, some electronic devices use analog signals as their input/output others may use digital signals as their input/output; some equipment uses an analog signal as the input and outputs a digital signal. Be sure to use the correct signal and signal strength otherwise you may damage your electronic device.
Its an IC which converts the analog signal at its input into digital output suitable for digital applications. It is an essential part of any digital system
In Analog communication, the analog message signal modulates some high carrier frequency inside the transmitter to produce modulated signal.this modulated signal is then transmitted with the help of a transmitting antenna to travel through the transmission channel. At the receiver, this modulated signal is received and processed to recover the original message signal. Example: AM , FM radio transmission an TV transmission.
There are chips that will convert a analog to a digital form. It works on the principle of comparing the input to a reference voltage and outputting the bits [digital] as a value compared to the reference voltage. it can be 4,8,12, of digital data for a 12bits the LSB is 2.4mv.
A computer only reads information in digital coding (binary) a truly analog signal would not register in a computer.
In a BMS system, starting and stopping of a piece of equipment is through analog input analog output points.
You will need a DVI cable. Note that DVI can be a digital signal, an analog signal or both. Look in the manuals the see which the computer and monitor support. It is normally digital, which might be referred to as DVI-D. If analog is supported, it will be called a DVI-A. A DVI connection that carries both will be called a DVI-I. If you find you have a choice, use the digital signal rather than the analog.