There are many ways to connect (6) 6V batteries. For a series connection (adds up to 36V) the most convenient method is alligator clips.
WARNING!!! DO NOT EVER connect the first battery to the last battery. They may blow up, and this could hurt you.
Connect them in series.
Connect two 6 volt batteries in series. Connect the other two 6 volt batteries in series. Now connect those 2 pairs you have together in parallel. You will end up with 12 volts.
Connect 2 of the 6 volt batteries in parallel and then connect the other 2 in parallel. Now connect those 2 pair in series to each other. You will now have a total of 12 volts with four 6 volt batteries connected in parallel/series. Click the link.
If you have two 6 volt batteries you can take a jumper wire and connect the negative post on one battery to the positive post on the other battery then connect the remaining pos and neg posts to the 12 volt battery charger.
you only need two 12 volt batteries to make 24 volt. connect them in series
Connect three 12 volt batteries in series and you will have 36 volts but will only have the amperage of one of the batteries.
connect the 2 six-volt batteries together one terminal each positive to negitive, this will make a 12-volt combination, then you can connect the jumper cables, one side to the 12-volt battery and one side to the two 6-volt terminals, + & -
You can connect batteries with different voltages in series (a 6 volt and a 12 volt would give you 18 volts), but never in parallel (difference of potential will create an arc, batteries could blow up).
yes
Yes.If you connect the batteries in series the total voltage will be the sum of the voltages of the batteries.For example if you connect a 12 volt battery in series with a 6 volt battery the total voltage will be 18 volts.
Assuming the truck has a 12 volt system, connect the batteries in parallel, that is positive to positive and negative to negative.
Yes connect all 3 batteries in series. 6+6+12=24 volts.