read the manual maybe, it's all in there.
Open the front panel on the console. Open the battery cover on the remote. Press the red sync button on the console. Press the red button on the remote just after. This should reconnect the remote to the console.
hold 1&2 at the same time to sync until it shows up on the remoe or concole
you can by pressing the red synch button on the wii remote in the battery section and the red button on the wii console near the cd insertion place
No, you cannot connect a Wii U controller to a Wii. Only Wii Remotes and other Wii accessories will work for the Wii, and the Wii U GamePad only works for the Wii U.
To connect the Wii Nunchuk controller to the Wii, first put the cord through the connector hook on the Wii Remote wrist strap and then the locate external extension connector on the base of the Wii Remote to insert the Nunchuk plug.
No, as you need to connect the classic controller to the Wii remote to use it, and the GameCube games don't recognise the Wii remote.
yes. i have done it.
There should be a flap that lifts up ontop of the wii and there are 4 slots to plug the controller into put it into the closest one to the power button. Not all wii's have that flap. The newer ones with new mario bros. wii dont have the flap, so the controller wont work. Found this out from gamestop.
It depends on which remote you are refering to. The Wii Motion Plus controller and the classic Wii Remote will work on the Wii and Wii U. The Wii U gamepad will not work on the original Wii.
No, Wii controllers don't have wires 2 connect 2 the gamecube
On the regular wii no but on the new wii u yes
just connect the wii remote or GameCube controller
Gamecube controller: plug it in the plug-ins under the flap on top of the Wii (in player 2, 3, or 4 plug-in) Wii Remote: press home on the first Wii remote. press wii remote settings. press reconnect. press 1+2 on wii remote 1. then press 1+2 on the second Wii remote. close the home menu with the home button. Nunchuck: connect wii remote. plug in Nunchuck. Classic controller: connect wii remote. plug in Classic Controller.
If your Wii supports Gamecube Games the Wii will have Gamecube Controller sockets. The GBA to GCN cable is an accessory cable that can connect to the gamecube controller sockets on the Wii and connect to the Gameboy Advance. Connect the GBA cable portion to the Gameboy Advance (the larger portion it has the Gameboy Advance logo on it) and connect the GCN cable portion (the smaller portion that is visually similar to the plug for controllers) to the Wii. Make sure that the plug is placed in a socket other than 1 as you will need to have a 1 player Gamecube Controller. Occasionally certain games such as Legend of Zelda Four Swords Adventures will allow players to use there GBA as 1st player rather than a Gamecube Controller.
On one of the sides the wii, you'll find some sort of tab. Open the tab. Connect the controllers there.