Most of these receivers are being made without a external antenna connector (HD tuner) now.
Dreambox works like all satellite tv receivers work. It decodes the signal coming from the satellite and allows you to watch satellite tv channels on your tv. You connect the dreambox to your satellite antenna, than connect it to your tv, and do an auto scan, and you can watch satellite tv channels on your tv. Almost all Dreambox are HD, so you can watch HD channels using dreambox receiver. Dreambox is a more advanced satellite receiver, allowing users to gain more control over the receiver and uses advanced softwares and ecryptions. This is why it is considered to be among the best satellite tv receivers.
By remote antenna, do you mean Over The Air (OTA). For the OTA, some receivers have a coax port on the back, TV antenna, where you can connect an outside antenna. From the receiver menu, you can scan the OTA channels into the receiver once the receiver has found the OTA channels. If this is not what you are asking, please let me know. Thanks.
Connect the satellite receiver to the surround receiver. You can then use the receiver to switch between this source and the the DVD or Blu-Ray player.
check first your satellite receiver if there is an HDMI jack. connect your HDMI cables from your satellite receiver to your tv tuner. if you don't have the HDMI jack, check the AV output jack. connect the AV cables from your satellite receiver to your tv tuner. you can use either AV or HDMI.
Freeview is the name of the UK's terrestrial digital television service. It is received only with a suitable UHF antenna. Other free television services for the UK include Freesat, available with a satellite dish and receiver or via Sky with out a subscription, limited to a selection of the free channels on the Sky platform.
Install the antennae outside your home on the roof. Connect a coaxial cable from the antenna to the "ANT" port on the back of the Captive Works box in your house. Connect a coaxial cable to the "TV/VCR" port. Connect the other end to the television.
You can connect your standard definition TV to your satellite receiver in a couple of ways. First, if your TV has composite video/audio inputs (yellow, red, and white RCA jacks), you can connect to these inputs using the composite video outputs of the satellite receiver. Another alternative is to use the standard coaxial cable output from your satellite receiver to connect to the 75ohm antenna input on your TV. *Note: Neither of these connections will display high definition programming on your standard definition TV. The TV is only capable of standard definition, so you will see a clear picture, but it won't be true high definition, regardless of the input signal's definition.
Use a high-end surround receiver. It will be able to connect to all of these things, and allow you to switch the source with a remote control.
no yes
You could use an external cable or satellite receiver and connect speakers to that.
This depends on the brand your satellite tv receiver is. If your receiver is for example, Dreambox, than you could connect it to a computer via the RS232 port or via the ethernet port located on the Dreambox receievr. On other brands, this may be different. On some brands you can not connect a tv receiver to a computer. So this is different for all receivers. Also, some special softwares would be needed to establish the conenction between computer a receiver.
To connect a digital TV converter box, follow these steps:1. Disconnect antenna from TV2. Connect antenna to antenna connection on Converter box.3. Connect an antenna cable from the converter box to the TV's antenna connection.4. Turn the TV to channel 3, turn on the converter box, and follow the setup menu from the converter box to search for channels.5. Keep the TV on channel 3, and change channels using the remote control for the converter box.