Want this question answered?
mixer main out TO behringer feedback destroyer input TO speakers
I am buying the new dj how dou connect with speekers
Yes you can connect it out of AUX send. infact that is the best place to connect it from
I would just connect it to the mixer without reducing it to 3/8".
No, but you can use one to connect it to a computer.
A preamp is required for all microphones, and is built in to the mixer if it accepts microphone inputs. The feature required for most condenser microphones is phantom power, a 48 volt signal that is supplied by the mixer to power the electronics inside the microphone. You must use an XLR (three pin) cable to connect the mic to the mixer to provide this power. There will be a Phantom or 48V switch on the mixer to turn this feature on and off.
Yes, you can connect a passive monitor speaker to an EMX 5000.
I have connected 4 to that mixer and it was too much. You will most likely take out the amp. if you connect 6. Two is about all it can handle.
A HDMI cable is used to connect a behringer mx400 mixer to a behringer head amp. This can be bought at just about an big store.
Vitamix is a very powerful mixer, you can even put any whole food into it.
You use an adapter.
Use a recording interface