Want this question answered?
Yes you can connect it out of AUX send. infact that is the best place to connect it from
Yes, you can connect a passive monitor speaker to an EMX 5000.
stereo mixer output to powered mixer input
Yes. In fact, I would recommend doing this instead of just running the mics through your band's powered mixer. That way, all your drum sounds (pre-mixed) will fit into just one input on your band's powered mixer. It takes about a minimum of 6 or 7 mics to capture a drum kit properly and that's a hell of a lot of inputs to be using on your band's P.A. Just run the mics through your own mixer, then run your mixer's "Main 1" output to your band's P.A. input. Use a balanced cable. Also, if the mixer that you are using is unpowered, then get yourself a couple powered monitors to run directly off of it so you can have some monitoring without using one of the the P.A. monitors. If your drum mixer IS powered, however, just get yourself some speakers and you've got yourself some monitors. In a nutshell, I recommend getting a small powered mixer for your drum mics (something with 100W minimum) with unpowered monitors running right off of it (use the "Main 2" output). Connect the mixer's "Main 1" output to your band's P.A. system for the final mix. But remember, if you do it like this, you have to dial in a good mix on your drum mics through your own little mixer because the sound guy will only be able to adjust the volume of the drum kit AS A WHOLE through the main P.A. system. This is what I do and it works very well.
Allen and Heath make a mixer that is just perfect for mixing monitors.
Very few powered mixers have a USB audio connection, but you can connect the line output out of almost any mixer to the inputs on the Mac to record with GarageBand.
anytime...no problems...that's how it should be
A powered audio mixer is used for combining, mixing, routing and changing the level, timbre or dynamics of audio signals. They can mix analog or digital signals depending on the mixer.
The Arkview USB-DH88 adapter will allow you to connect up to 6 monitors.
No. To use an MD-12 in as a sound re-enforcement mixer, you will need to have a separate power amp.
mixer main out TO behringer feedback destroyer input TO speakers
I am buying the new dj how dou connect with speekers