The same as any pool. you plug the vacuum hose into the vacuum plate over the top of the leaf basket, connect the vacuum head to the end with the pole on it leave the sand filter on filter setting and vacuum the bottom.
Starting with the assumption that one knows what a pool vacuum is. (1) Connect a pool hose to it. (2) Connect the pool hose to the vacuum plate over the leaf basket. (3) Connect the vacuum head to a pole long enough to get the reach you need. (4) place the pool head (hole down ) on the pool floor. (5) start the pump, (making sure it is set to filter). (6) Systematically rub the pool vacuum head along the pool floor and walls where possible until you have covered all submerged surfaces. (7) Stop the pump. (8) Unplug pool vacuum hose. (10) Remove vacuum plate and clean rubbish out of basket. (11) Replace basket. (12) check that Hair/Lint basket against pump is clear and clean out if necessary. The pool should now be ready for use if the filter is also clean enough for use
how to program a pool vacuum
Any pool vacuum can, including the Polaris.
How do I vacuum an above ground doughboy pool?
A vacuum head that has a brush on the bottom - no wheels.
Well i have a pool myself, and sand is not wanted in it. The rocks in it can puncture the liner (if it has a liner). You should vacuum it out with a pool vacuum. Hope i helped
I think you have to make it out of plastic then connect to the vacuum
You can use a pool vacuum to clean dirt off the bottom of a pool. A pool vacuum clear is designed to be connected to a water source or it can be connected to your pool's circulation system.