Divide 2.13 by 1000.
Volt Amps conversion
Use the equation I=q/t, where I is amperes, q is coulombs and t is time in seconds.First you have to convert the minutes to seconds, so 60 x 8= 480 seconds. ThenI=1100/480. I = 2.29 amperes.
Since the ampere is the SI unit for current, and the volt is the SI unit for potential difference, we are looking at two completely different quantities. So you cannot convert one to the other.
To convert watts to amps a voltage value must be given. Amps = Watts/Volts. Amps = .011/Volts.
nA is a nano ampere, one billionth of an ampere. 235.3 nA would be 0.000 000 235 3 amperes.
50
If you mean milliamperes to amperes divide by 1000. In other words 1200 milliamperes =1.2 amperes
Volt Amps conversion
m means milli, or thousandths. Multiply the number of amperes by 1000.
Amperes does not convert into volts they are two different values. Become familiar with the following formula and look at the relationships between the values. Volts = Amps x Resistance, Amps = Volts / Resistance and Resistance = Volts / Amps.
it is impossible to convert volts into amperes, because there are two different units of measurement. Volts refers, as you know, to voltage, or the electric potential difference between two points, and amperes refers to the current, or the intensity of the electric current. Its like trying to convert horses into donkeys.
You cannot convert them. KVA is a measure of power, while amperes are a measure of current.
Convert the current to amperes, then (using Ohm's Law), divide voltage by current.
Because you are not using correct symbols, it's difficult to know what you are asking. A lower-case 'm' means 'milli' (one-thousandth), whereas an upper-case 'M' means 'mega'. Furthermore, if you mean, 'volt amperes', then the symbol is 'V.A', not 'va'. It's important to use the correct symbols, so people know exactly what you mean. I suspect what you mean is how do you convert kV.A into MV.A? That is, how do you convert kilovolt amperes into megavolt amperes (rather than 'millivolt amperes'). In which case, there are 1000 kV.A in 1 MV.A.
Use the equation I=q/t, where I is amperes, q is coulombs and t is time in seconds.First you have to convert the minutes to seconds, so 60 x 8= 480 seconds. ThenI=1100/480. I = 2.29 amperes.
15500 nano amperes or .0155 milli amperes or .0000155 amperes
You need to know the voltage as well before a conversion can be made.Another AnswerThe ampere is the SI unit for electric current. There is no other unit for current, so you cannot convert amperes to anything.