Into units of what?
hp or power is torque/time (rotating motor) 3000# can be lifted 10' in a minute with 1Hp 30,000# can be lifted 1' in a minute with 1Hp 1000 tons can be lifted 1' in an hour with 1 hp
15
For 1 hp motor, a single phase starter is used. Because a single phase starter gives economy consumption,easy trouble shooting and easy installation when compared to three phase starters and supply....
1.8 kilowatts = 2.4 hp <<>> The conversion is 746 watts are equal to 1 horsepower. To change 1.8 kilowatts to watts is 1.8 x 1000 = 1800 watts. Therefore 1800/746 = 2.4 horsepower. This is how the answer above was obtianed.
No, not directly. The supply voltage has to rise or the resistance has to fall to get over-current. If there was a secondary control voltage that was part of a voltage control circuit for a higher voltage, it is conceivable that a voltage drop in control circuit could cause an over-voltage in the supply. Motors are constant power devices, so this could be true for a motor. If you have a 1hp motor (loaded at 1hp), it will want to draw 1hp of power no matter the supply voltage. If the voltage dips, the motor will require more current to keep it spinning at it's normal speed.
100
The value of the capacitor for a 1hp AC motor depends on the specific motor design and manufacturer guidelines. It is important to consult the motor's documentation or contact the manufacturer to determine the correct capacitor value for proper motor operation.
1hp = 0.7457 kW 1hp = 745.7 W 1W = 1.341 hp you can use these conversion factors
1hp = 746 watts, so 2hp would be 1492 watts, or almost 1.5 kw kWh does not convert to hp, as kWh has a time component.
The amperage of a motor is governed by the voltage that the motor operates on. Without a voltage given, an answer can not be given.
hp or power is torque/time (rotating motor) 3000# can be lifted 10' in a minute with 1Hp 30,000# can be lifted 1' in a minute with 1Hp 1000 tons can be lifted 1' in an hour with 1 hp
Depends on the ratings(volts, amps, etc.) Definitely not an AC motor.
230V/1Ph/50Hz 1HP (0.75 kW)Motor Capacitor start induction motor ( single phase)
The plug gap for the 35 hp Evinrude outboard is .030 in.
maximum current of a 1hp
Cannot be answered as they are not compatible units. You might as well be asking "How many oranges in one railroad tie?".
if you know the Kw of compressor then it is easy to convert Kw to Hp.as 1Hp is equal to 746 Watts.eg if compressor is 1.2 Kw convert kw to watts so we have 1200 watts now as 746 watts=1Hp so 1200/746=1.6 hp.i hope it will help.remember the compressor wattage is given on the name plate.