yes, but you need a transformer to convert it,
in circuits to reduce or to add voltage is used coil components
of course. go to the market and buy a transformer. It will convert a 110V supply to a 220V supply.
Best way is to use a step up transformer to step up the voltage from 110V to 220V
Yes, but you will need a converter to convert the 220v into 110v. You can buy these at WalMart or RadioShack.
This isn't an answer- it's from the questioner :) Just to clarify: This is the small, apartment-sized, stacked washer-dryer unit. They used to commonly come in 110V. They are still out there but old and sell for same price used as the used newer 220V. So we'd like to buy a newer used 220V and convert if possible and safe. Don't know the watts on these, tho. But must not be as large as regular sized dryers?
The easiest solution is to leave the 220V original outlet alone and plug the 110V dryer into a close 110V outlet, most likely the one for the washer. There should be nearby 110V outlets so you don't have to muck with rewiring the 220V outlet. A short heavy-duty extension cord is an option. I would also recommend killing the power to the old dryer outlet if it is unused. It cannot hurt. If you cannot plug the dryer into a nearby 110V outlet you can derate the 220V outlet down to a dedicated 110V outlet. This is not a task to be taken lightly if you are not experienced. If you do take this course of action yourself, buy a book. Do it right or don't do it at all. Negligence could kill someone.
Yes it will. The only thing that you have to keep in mind is that in Angola the power is 220V so U'll need a power brick with 220v. Or U can buy a power converter to convert 220v to 110v.
You cannot directly plug a 110v device into a 220v outlet. This can cause damage to the device or even create a safety hazard. You would need a voltage converter or transformer to safely convert the 220v outlet to the appropriate voltage for the 110v device.
No.. you can't... You will actually be damaging your instrument.. It is highly recommended that you use voltage converter... I think it is not too costly
Use a transformer to lower from 220 to 110V.
You need to convert the voltage if your appliance requires less voltage than you power supply. example: appliances is 110V and power supply is 220V.