in circuits to reduce or to add voltage is used coil components
You cannot directly plug a 110v device into a 220v outlet. This can cause damage to the device or even create a safety hazard. You would need a voltage converter or transformer to safely convert the 220v outlet to the appropriate voltage for the 110v device.
Use a transformer to lower from 220 to 110V.
Do not do this.
Depends. Some smaller stuff can usually run on both, in which case it will be printed on them. If it isn't, you can't run a 220v item on 110v.
The fact that it's supposed to. Voltage is stated as the difference between the two wires carrying electricity to the load. When they bring power to the house from the utility, you get two wires carrying 110v but they're 180 degrees out of phase. Imagine one carries positive 110v and the other carries negative 110v. If you hook one of these wires plus a neutral (zero volts) to the load, you get 110v--110v over 0v. If you hook both of them to the load, you get positive 110v over negative 110v, or 220v. So...red to white is 110v, black to white is 110v, red to black is 220v.
yes, but you need a transformer to convert it,
of course. go to the market and buy a transformer. It will convert a 110V supply to a 220V supply.
Best way is to use a step up transformer to step up the voltage from 110V to 220V
Yes, but you will need a converter to convert the 220v into 110v. You can buy these at WalMart or RadioShack.
Yes it will. The only thing that you have to keep in mind is that in Angola the power is 220V so U'll need a power brick with 220v. Or U can buy a power converter to convert 220v to 110v.
You cannot directly plug a 110v device into a 220v outlet. This can cause damage to the device or even create a safety hazard. You would need a voltage converter or transformer to safely convert the 220v outlet to the appropriate voltage for the 110v device.
No.. you can't... You will actually be damaging your instrument.. It is highly recommended that you use voltage converter... I think it is not too costly
Use a transformer to lower from 220 to 110V.
You need to convert the voltage if your appliance requires less voltage than you power supply. example: appliances is 110V and power supply is 220V.
Do not do this.
No
No.