Add a circuit to reset it when it hits 10. Yes it will glitch, but ripple counters already glitch.
A ripple counter is a counter in which state transitions of one or more flip flops are triggered by the outputs of other flip flops in the circuit. If all flip flops in the counter are triggered by a common clock pulse, then the counter is called a "synchronous counter". a ripple counter is a counter that will ripple through the information sequentialy. .
brief explanation of asynchronous ripple counter
a counter is a counter which counts the data and the decade counter is the counts the decade ones
There are five flip-flops in a five-bit ripple counter.
clock signal divider
A synchronous counter is not referred to as a ripple counter. They are two different things. The ripple counter uses the output of each stage to trigger the input of the next stage, resulting in propagation delay between stages. The synchronous counter, on the other hand clocks all stages on the same clock edge, making them all change at relatively the same time.
The word ripple in ripple counter refers to the fact that the carry ripples from one flipflop to the next, instead of being pre-calculated by logic so that all the flipflops in the counter change state synchronously. Thus the bits in a ripple counter change state asynchronously with the most significant bits changing last. This can produce race conditions and instabilities in logic circuits that are driven by these counters.
16
The use of a decade counter is to store or keep track of something happening or an event . Usually, counter circuits are digital in nature.
a mod-10 counter is a basic formula for the male and female combination !
12 mod design
when a.c convert in d.c then some components of a.c remain with it called ripple factor