Want this question answered?
Cross over FROM where TO where?
Resistance Memorial Cross was created in 1980.
the larger the cross sectional area, the smaller the resistance
Dutch Cross of Resistance was created on 1946-05-03.
Yes. The bigger the cross section, the lower the resistance.
Rubicon
Resistance is inversely proportional to cross-sectional area. so ,if the thickness of the wire increases, the area of cross-section increases and this results in decrease of the resistance. The resistance R = l p / A where R is the resistance, l is the length of the wire, p(rho) is the electrical resistivity of the material and A is the area of cross section. So R the resistance is inversely proportional to A the area of cross-section. If R increases
what route did the forces use to cross into France
the resistance can never increase or decrease....... (you can't open the resistor and take out the something and make the resistance increase or decrease)AnswerSince resistance is directly proportional to the length of a conductor, increasing the length of a wire will increase its resistance. For example, if you double its length, you will double its resistance.
Resistance is inversely-proportional to the cross-sectional area of a conductor. For example, doubling its cross-sectional area will halve its resistance, while halving its cross-sectional area will double its resistance.Since the cross-sectional area of a circular-section conductor is proportional to the square of its radius, doubling that radius will reduce its resistance by one quarter, while halving its radius will quadruple its resistance.
Cell constant(C) = Resistance(R) X Specific Conductivity(K)
If two pieces of wire are made of the same material and have the same length but different resistance, then the one with the greater cross section area has the lower resistance.