There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
Bring to a shop that has an ABS scanner to determine the problem
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
No, a 1997 Ford F150 doors will not fit on a 2001 Expedition. You will need to get a door that is made specifically for the Expedition.
You want a violent twitch for your 1997 Ford F150?
The airbag module for the 1997 Ford F150 is located in the passenger side kick panel below the dash. It is silver and black in coloring.
1997 ford f150 fuel pressure specs
half inch..
18436572
Where is the location of the fuel pump relay in the 1997 Ford F150.
How do I locate the heater blend door actuator in a Ford f150 pickup
you can take vin to a ford dealer and they can tell you what ratio you have.or you can read in ownere manuel how to translate the vin. there is an explanation on which numbers mean what,and in the book is a list matching numbers to ratios
On the 1997 Ford F150, the differential could be in both the front and rear. From 1997 and on Ford used two different axles. Your truck could either have the 8.8 or 9.75 differential. If you have a rear differential you would need to lower your spare tire to have access to it.