answersLogoWhite

0


Best Answer

diagnosing...1. open the hood 2. turn vehicle on 3. while watching the engine(you may need someone else to watch if you can't see it) press on the brake and put the car in gear. if the motor mounts are bad the engine will shift more than normal. Most mechanics will give you a free diagnosis of this if you can't determine on your own.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you diagnose and replace bad motor mounts?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the risk of having bad engine mounts - is it HIGHLY critical or you can replace in a couple of months?

The risks of driving with bad motor mounts can be high. if the mounts have completely separated, then the motor is free to move at will. The motor could puncture the radiator or damage other components.


Where are the motor mounts and transmission mounts on a 1997 Ford Taurus gl And how can i tell if they are worn out or bad?

The 1997 Ford Taurus has for motor mounts and to transmission mounts. Worn motor mounts and transmission mounts will allow the engine and transmission to have movement.


Are bad motor mounts dangerous?

It is a honda van! Well that dependes on what car you have and which motor mount is bad


How do you know if your motor or transmission mounts are bad?

It is important to know the symptoms of a bad car part. The symptoms of a bad motor or transmission mounts are loss the car part, shaking and lots of noise.


Can your motor fall out if the mount needs to be replace?

While it is possible for an engine to fall out if the motor mounts are bad, it is very unlikely. However, a broken mount will likely destroy the engine if it is not replaced.


Does a bad PCV valve cause jerking in engine?

Check your motor mounts and what your at it check trans mounts.


Do the motor mounts have anything to do with vibration inside car?

Yes. Totally! If the engine mounts are bad the whole car will vibrate and run bad. Get it fixed.


How do you change the oil pan gasket on Chevy Trailblazer?

its about as bad as pulling the motor undo the mounts hoses wiring anything that will get to tight and raise motor up enough to remove the pan to replace gasket


Would bad motor mounts cause steering wheel to vibrate?

yes


How can you tell if motor mounts are bad?

If you rev your motor and the motor moves excessively one or both of your motor mounts is broken. Visual inspection is the best method for determining the condition of your mounts. Jack up the car and put it on jack stands. Get underneath and look at each of the mounts. The rubber should not be cracked or missing pieces. Push on the motor with your hand and make sure the rubber is not broken and that both sides ( motor and the part of the chasis where it mounts ) are firmly attached.


Can you have your car engine tighten down?

Engines are held into the vehicle with "motor mounts"... although they should probably be called "engine mounts". Motor mounts can go bad and the engine can move excessively. If a motor mount has failed, take it to just about any reputable mechanic and it can be replaced.


Did General Motors make a bad motor mount on the Oldsmobile Ninety-Eight?

It is possible, but there were no recalls relating to motor mounts.