Want this question answered?
Equal parts of 5 volume developer + 15 volume will yield approximately 10 volume.
Check what it is dissolved in first and use the same solvent for dilution. If you want to make a litre of 10% for instance, You want to dilute it 10 in 26 parts or 5 in 13. So 1 litre /13*5 is 384.6ml of 26% ammonia, and dilute to 1 litre with solvent
1.8*10-5 m3/mol
Add 5 litres water.
Make a 1 to 100 dilution of the original 1000 ppm solution. That is take 1 ml and dilute to 100 ml, or take 10 ml and dilute to 1000 ml. This will give you a 10 ppm solution.
10 volume
Dilute it with water until the volume is 5 times the original volume
Dilute a measured volume of the 100 mM solution with 19 times its own volume of pure water to produce a 5mM solution.
It would be easier for you to dilute it yourself with apple juice; Dilute 5% 10 to 1 for 0.5% Dilute 7% 14 to 1 for 0.5%
Volume = 261.8 (261.79939) units3
Volume =Length×Width×Height Substitute the given dimensions: Volume = 5×2×1=10 So, the volume of the cuboid is 10 cubic units.
5
Equal parts of 5 volume developer + 15 volume will yield approximately 10 volume.
5-10%
You need to add an amount of solvent, such as water, to dilute it but you didn't specify the volume of the starting solution.
Volume = Length x Height X Width It is 5 x 10 x 4 = 200. If then length is measured in units, then the volume is units³
Density is mass divided by volume - for example grams per cubic centimeter (or "cc").I will assume that you meant that the volume is 10 cubiccentimeters.Then you get (20 grams) divided by (10 cc) = 2 g/cc