you don't, why would you want to? It is much safer to drive with lights on at all times. that is why they design them like that!
I found this web site on DRL, check it out. http://www.lightsout.org/disable.html
Typically one cannot disable a drl on the 2003 Honda Accord because it is a required safety feature. To disable the drl you would have to take it to any Honda service center and have them disable the drl for you. They would have to disconnect the required attachments to successfully disable the drl without compromising the rest of the mechanisms.
To disable the Daytime Running Lights (DRL) on a Kenworth truck, locate the DRL fuse in the fuse box and remove it. Alternatively, some models may allow you to disable the DRL through the vehicle's dashboard settings or by adjusting the headlight switch. Always consult your owner's manual for specific instructions related to your model year. If you're unsure, it's advisable to seek assistance from a qualified technician.
Find and disable the DRL module.
To disable the Daytime Running Lights (DRL) on a 2008 Mitsubishi Lancer, you can typically do so by removing the fuse associated with the DRL system. Check your vehicle's owner manual for the exact fuse location. Alternatively, you can also disconnect the DRL module if accessible, or consult with a professional mechanic for assistance. Always ensure safety precautions are taken when working with the vehicle's electrical system.
To disable the daytime running lights (DRL) on a 2008 Ford F-150, you can use the vehicle's headlight switch. Turn the ignition to the "On" position without starting the engine, then press the brake pedal and turn the headlight switch to the "Off" position. Hold the switch in that position for about 10 seconds, and then release it. This should deactivate the DRL feature. If this does not work, you may need to consult the owner's manual or a professional for further assistance.
In the european version 2008 facelift is under the clove compartment in drivers sear. Its the C102 relay that's near the fuses of DRL's.
To disable the daytime running lights (DRL) on a 1997 Ford Explorer, locate the DRL relay under the dashboard or in the fuse box. You can either remove the relay or disconnect the wiring associated with it. Alternatively, you can also check the fuse for the DRL and remove it, but be aware that this may affect other lighting systems. Always consult your owner's manual for specific instructions related to your model.
take the relay out
Under the dash on the drivers side towards the center of the car is a black box. This box is your DRL box, along with your door dinger and various other functions. Find out whitch pin/wire is for the DRL's and just cut it then tape it up.
The simplest way to do it would be to cut the DRL wires to the headlamp assemblies. The more complex way would be to locate and remove the DRL circuit board under the dash.
To disable the daytime running lights (DRL) on a 2007 Toyota Matrix, you can locate the DRL fuse in the fuse box under the dashboard or in the engine compartment and remove it. Alternatively, some models allow you to disable DRL through the vehicle's settings, so check your owner's manual for specific instructions. If you're unsure, consider consulting a professional mechanic for assistance.