On a 2008, fuse 13 (10 amp) located inside the fuse box in the engine bay controls your DRL. Removing it should disable your lights.
Typically one cannot disable a drl on the 2003 Honda Accord because it is a required safety feature. To disable the drl you would have to take it to any Honda service center and have them disable the drl for you. They would have to disconnect the required attachments to successfully disable the drl without compromising the rest of the mechanisms.
take the relay out
I found this web site on DRL, check it out. http://www.lightsout.org/disable.html
you don't, why would you want to? It is much safer to drive with lights on at all times. that is why they design them like that!
Under the dash on the drivers side towards the center of the car is a black box. This box is your DRL box, along with your door dinger and various other functions. Find out whitch pin/wire is for the DRL's and just cut it then tape it up.
The simplest way to do it would be to cut the DRL wires to the headlamp assemblies. The more complex way would be to locate and remove the DRL circuit board under the dash.
To disable the daytime running lights (DRL) on a 2007 Toyota Matrix, you can locate the DRL fuse in the fuse box under the dashboard or in the engine compartment and remove it. Alternatively, some models allow you to disable DRL through the vehicle's settings, so check your owner's manual for specific instructions. If you're unsure, consider consulting a professional mechanic for assistance.
To disable the Daytime Running Lights (DRL) on a Kenworth truck, locate the DRL fuse in the fuse box and remove it. Alternatively, some models may allow you to disable the DRL through the vehicle's dashboard settings or by adjusting the headlight switch. Always consult your owner's manual for specific instructions related to your model year. If you're unsure, it's advisable to seek assistance from a qualified technician.
push the overide swithch 2 times
To disable the Daytime Running Lights (DRL) on a 2002 Chevy Prizm, you can locate the DRL relay under the dashboard. Remove the relay or disconnect the wiring harness leading to it. Alternatively, you can fuse the DRL circuit by removing the appropriate fuse from the fuse box. Always consult your vehicle's manual for specific instructions and safety precautions.
Simple: Remove fuse #15. It is labeled DRL/FOG. If you have fog lights you will lose those too.