1994 Dodge INTREPID..DISABLE ALARM You can't remove it. It is part of the computer progamming. You should be able to disarm it by unlocking the drivers door with a key, or with remote. If the door key doesn't turn it off, the switch on the key cylinder has come unhooked.
The easiest way to disable your 1994 Chrysler New Yorker alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
The transmission in an Intrepid does not have any bands in it.
The 1994 Dodge Intrepid O2 sensor is located on the outside of the air cleaner housing. The sensor is on the back side of the housing.
Check the fuse box. There is an "Alarm" fuse.
A 1994 Intrepid is OBD1. The connector is a 6 way under the dash on the driver side.
Dodge does not use inertia switches.
It is on the column on the right.
how do you program a keyless remote for a 94 Dodge Intrepid. I battery died and now the horn keeps going off
It is on the front of the driver side of the block.
Because your car is old and a piece of crap. Seriously, check the alternator. It may be dying.
As long as they are the same size and all the plumbing and eletrical line up. A 3.3 liter into a 3.3 liter, for example.
go on bing.com
Down the transmission dipstick tube.
Chrysler calls it a 42le
There is a disable switch called (valet switch) under the driver side of dashboard. Switching to opposite position should disable the alarm system.
trying to replace the starter on a 1995 3.3 dodge intrepid! what problems if any can i anticipate?
A 1994 Ram does not have a passenger side airbag.
disconnect and reconnect the battery
The fluid goes down the dipstick tube.