Remove the switch and disconnect the wires. Then solder the wires together (making a note of polarity if there are more than 2) to create a circuit. This will then act as though the door is shut and the alarm will not sound.
TURN THE KEY IN THE DRIVERS DOOR FROM LEFT TO RIGHT
taking out he fuse disables the whole system..your alarm will no longer work
i have a 1994 4runner, i was having the same problem with the alarm. i went to the dealership and purchased a remote from them it was only about 20 bucks all it does it unlocks the doors and and sets and disables the alarm it works great, good luck.
Disarm was created on 1994-03-22.
Unlock the car with the remote or with the key in the door.Unlock the car with the remote or with the key in the door.
There is no way to disarm a driver airbag on a 1994 Dodge Ram. Most vehicles will only let a person disarm the passenger airbag.
1994 DODGE INTREPID..DISABLE ALARM You can't remove it. It is part of the computer progamming. You should be able to disarm it by unlocking the drivers door with a key, or with remote. If the door key doesn't turn it off, the switch on the key cylinder has come unhooked.
Ok, need to take down the steering column underpanel. Then you want to ground out the factory alarm disarm wire. Normally, you would insert the key in the drivers door, turn left, then right to disarm and reset it. If yours is malfunctioning, you can disable it for good by doing the following: The FACTORY ALARM DISARM WIRE IS lt.grn/blk/ sil dots |-|anti-theft module, The Anti-theft module located to left of steering column. Says Theft Warning on module. Once Located, splice into this wire with a similar guage wire, and put it to a solid chassis ground. This terminates the alarm functions entirely. However, at this point, this car would be exceedingly easy to steel, so I suggest you get an aftermarket alarm system to protect it from here on in. Have a good day. ALARMTEK CARALARMSTORE.com
The liftgate, and both front doors should have switches on the key cylinders for disarming.
Alarm industry revenues were $9.8 billion in 1994
The easiest way to disable your 1994 Chrysler New Yorker alarm is to remove the alarm fuse. The alarm fuse can be found in the fuse box.
Without Warning - 1994 TV was released on: USA: 30 October 1994