DCX D means decrement register pair DE by one
3 T states for instruction fetch, 1 T state for decode, 1 T state for register E decrement, 1 T state for possible register D decrement.
8085 is a 8 bit microprocessor designed by Intel.
6 general purpose registers.i.e., B,C,D,E,H,L
8085 microprocessor is 8 bit microprocessor develop by Intel corp. it's architecture can be study broadly over internet various sites provide the information about architecture. some is given below 1-data bus - 8 2-address bus- 16 3-memory- 64 KB 4-GPRs - B,C D,E H,L 5-each of 8 bit 6- A L U. airthmatical logical unit.
8085 microprocessor is 8 bit microprocessor develop by Intel corp. it's architecture can be study broadly over internet various sites provide the information about architecture. some is given below 1-data bus - 8 2-address bus- 16 3-memory- 64 KB 4-GPRs - B,C D,E H,L 5-each of 8 bit 6- A L U. airthmatical logical unit.
The stack size of Intel's 8085 microprocessor is theoretically 64 kb, but the real limit is a function of memory and program architecture and layout. The stack pointer is 16 bits, but that is not the same as stack size.
Lxi b, 0000h lhld 8000h xchg lhld 8002h dcx d l006: lda 8002h add l mov l, a lda 8003h adc h mov h, a jnc l013 l013: inx b dcx d mov a, d ora e jnz l006 shld 8006h mov l, c mov h, b shld 8004h hlt
Block transfer in 8085... PUSH FLAGS {optional, if registers need to be saved} PUSH B PUSH D PUSH H LXI H,COUNT LXI B,SOURCE LXI D,DESTINATION LOOP LDAX B STAX D INX B INX D DCX H MOV A,H ORA L JNZ LOOP POP H {optional, if registers need to be saved} POP D POP B POP FLAGS
AMD (Advanced Micro Devices) designed the Athlon x86 microprocessor.
Suppose you want to add 11 and 12.instruction are : mvi a,11h mvi b ,12h mov d,b add b
The 8085 microprocessor is used IC 74LS373 to latch the address of 8085. Basically latch is consists of 8 flip flops. Generally we used D-flip flops (Delay).The clock of these flip flops are connected together and available as a output pin called enable.Working : The address will appear on AD0 AD7 lines. The ALE will go high and forcingEnable = 1. This will make latch enable and ready to work. Before address disappears ALE = 0. This will make latch disable. AD0 - AD7 will now be used as data bus.Hence, AD0 - AD7 (low order) address bus of the 8085 microprocessor is multiplexed (time-shared) with the data bus. The buses need to be demultiplexed.
Yes. You can upgrade your Dell XPS 400 Intel Pentium D to Intel core i7.