You'll need is a 5/8" Spark Plug Socket with a 6" extension and a wrench to be able to get in all the way. The spark plug socket has a rubber cone inside so it grips onto the plug and makes it easier to pull out. You will also need a 10mm socket to take off the engine cover, and each individual ignition coil.
1st remove the engine cover by removing the 2 bolts and the 2 clips
Once that is done, you will see an exposed valve cover and 4 coil packs. undo each coil (using a size 10mm socket and wrench) pack and pull up on them to get it off the spark plug hole. Do these one at a time (recommended). Put in your spark plug socket with the extension and start unscrewing. After removal, put in the new plug and tighten till it wont go any further. NO RECOMENDED TORQUING SETTING.
Just tightened them to a little past where your hand would need some effort from the other hand. repeat for other spark plugs.
R.Chang
.044
The 2006 Toyota Corolla has 16 valves.
The 2006 Toyota Corolla has an inline 4 engine.
The 2006 Toyota Corolla is a gas-powered vehicle.
The 2006 Toyota Corolla has a 5-speed manual.
The 2006 Toyota Corolla has double overhead cam (DOHC).
The curb weight of the 2006 Toyota Corolla is 2530 lbs..
The 2006 Toyota Corolla runs on regular unleaded.
The 2006 Toyota Corolla is 14 ft. 10.3 in. (178.3 in.) long.
The height of the 2006 Toyota Corolla is 4 ft. 10.5 in. (58.5 in.).
The 2006 Toyota Corolla's turning circle is 36.1 ft..
The 2006 Toyota Corolla has a drag coefficient of .30 Cd.