Want this question answered?
The valves in a 2.4 L Engine Are not Adjustable
no valve adjustment. hydraulic lifters (cam followers).
EGR sensor ( gas temperature sensor ) is monted near the EGR valve, which is install into the EGR tube.
.006" intake and .010" exhaust
its under the intake and i would wipe it down with a rag if it needs it you might have to clean the line though
Nissan L18 valve clearances (hot) are: inlet - 0.25mm exh. - 0.30mm. For the guys in the USA this is 10 thou and 12 thou (inch) Syd - South Africa
No adjustment.
No adjustment. If there is valve clatter, valve train parts are worn.
1980 Nissan/Datsun Truck 720 Truck 2WD 2.0L 2BL SOHC 4cylThe PCV Valve is located:Under hood, center, upper engine area, mounted in intake manifold
5.7 later valve adjustment procedure begins with the removal of the valve cover. Each valve has an adjustment screw. The screws can be turned to adjust the valves.
PCV valve is under the induction system
There is no valve adjustment for that engine. If you have valve clatter you must have worn valve train parts.