shoot a hole in the talk with a 8mm assult rifle then weld the hole back toghter
Yes, that is one way to do it, but why? Why not just remove the drain plug and drain the oil. Removing the oil by sucking it out the dipstick tube will not get all the old oil out, but it can be done that way for whatever reason.
I dnt no
Please give me the location of the Oil Filter and Oil Plug on a 2007 Cadillac CTS 2.8L Engine.
Where is oil drain plug on 2007 avalanche
To get to the oil drain plug on a 2008 CTS you'll need to remove the protective shroud held in by 4 screws. Pull the shroud down at the rear and slide it to the rear to remove. The oil pan is now easily seen with the drain plug coming off the driver's side.
where is the oil drain plug on a 2007 ford escape 4 cylinder
13 mm
The oil drain plug on a 2006 Cadillac CTS is located on the bottom of the engine oil pan, which is situated underneath the vehicle. To access it, you'll typically need to lift the car using jack stands or a hydraulic lift. The drain plug is usually a hex or square-shaped bolt that can be removed with a socket wrench. Always ensure to have a drain pan ready to collect the old oil when you remove the plug.
Remove the oil pan drain plug to drain the oil. Remove the lower radiator hose to drain the coolant.
On a 2007 Cadillac CTS, the air conditioner drain is typically located on the passenger side of the vehicle, near the firewall. It is a small rubber or plastic tube that allows condensate from the AC system to drain outside the vehicle. If you're having trouble finding it, you can look underneath the car while the AC is running to see if water is dripping from the drain tube.
The oil drain plug is located on the bottom side of the engine of a 2007 Ford Ranger. It is directly on the oil pan.
On the oil pan.