There's a plug at the bottom of the radiator... usually on the passenger side. You unscrew it, and you can run a garden hose into your radiator fill to flush out the remaining coolant.. you do this while the vehicle is running, so that the thermostat will open up and cycle coolant (and the water you're flushing it out with) through the system.
Just drain the rad at the petcock (little valve on bottom) & fill w/50/50 mix.
The coolant drain on a 2003 Pontiac Grand Am is located on the bottom of the radiator on the right side. It allows coolant to be quickly removed during maintenance and flushes.
where the radiator drain on 2003 bettle
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
there isn't a radiator drain plug. you have to remove the lower radiator hose from the radiator to do a drain and fill.
remove pass side inner fenderwell. On the radiator you will see a drain. Loosen that and coolant will pour out. reinstall drain plug and top off with coolant approximatly 4 gallons.
my drain is brok and i casn not get it out how can i drain the coolant?
You need only to drain off a couple quarts of coolant to change the thermostat.
The 2003 Cadillac Escalade has a V8 engine.
The 2003 Cadillac Escalade has 16 valves.
To drain the coolant on a Mazda 626, locate the drain plug on the bottom of the radiator. Remove the plug and drain the coolant into a pan.
Take the cap off the radiator and open the petcock on the bottom of the radiator.