0
how you doing ? first you need to go to a automotive store and buy a air vac. you'll have two fittings on the ac system. high and low out put ,the high out put is on the line and the low on the canister. hook up air vac to the canister fitting and hook air hose to the vac and this will drain the ac system
What else can I help you with?
Where is evaporator drain hose on 1998 Pontiac transport?
The 1998 Pontiac Transport evaporator drain hose can be found on the bottom of the air conditioner compressor. The evaporator drain hose routes water to the bottom of the engine compartment.
How do you drain the cooling system in a Pontiac Montana?
To drain the cooling system in a Pontiac Montana, first ensure the engine is cool and then locate the radiator drain petcock at the bottom of the radiator. Place a container underneath to catch the coolant, open the petcock, and allow the coolant to flow out completely. Additionally, you can remove the lower radiator hose for a more thorough drain. After draining, close the petcock and reattach any hoses as needed before refilling with fresh coolant.
What is the purpose of the AC drain pipe in a cooling system?
The purpose of the AC drain pipe in a cooling system is to remove excess moisture that accumulates during the cooling process, preventing water from leaking or causing damage to the system.
What is the GM approved procedure for draining and filling the entire cooling system radiator and block for a 98 Pontiac Transport?
Hey Nancy==Simply remove the drain plugs from each side of the block and the bottom of the radiator. CAtch the old coolant and dispose of it properly. Refill the system with 50/50 mix of coolant and water. GoodluckJoe
How do you bleed the cooling system 96 acura 3.5 tl?
To bleed the cooling system on a 96 Acura 3.5 L, cool the radiator and remove the radiator cap. Loosen the drain plug and drain.
How do you bleed air pocket from cooling system?
drain the whole cooling system and refill it. You will never know if you don't give details of your car!
No radiator cap once you drain the radiator how do you flush the cooling system?
If you do not have a radiator cap once you drain the radiator, you can use several options to flush the cooling system. You can easily do this by filling up the system with as much water as you can and then warm it up.Ê
How to Drain cooling system on 2001 Dodge Intrepid?
Remove the lower radiator hose or loosen the radiator drain.
Where is cooling system block drain 2001 explorer 4.0?
there is no "block drain", just remove the lower radiator hose to drain the block
How do you replace the heater cor on a 2003 Pontiac aztek?
To replace the heater core on a 2003 Pontiac Aztek, first, disconnect the negative battery cable and drain the cooling system. Remove the dashboard and the center console to access the heater core housing. Disconnect the heater core hoses from the firewall, unbolt the heater core from its housing, and then replace it with the new core. Reassemble everything in reverse order, refill the cooling system, and check for leaks.
How do you flush the cooling system on a Ford Focus?
there is a drain plug on the bottom tank of the radiator
Drain the cooling system vauxall 1.9cdti?
pull off the lower radiator hose.
