Use a cheap shop vac to get most the water out or it will mildew so bad you might have to discard it, then you can use fans or an air mover which they sell at Home Depot.
The old labor intensive way of putting up walls had wet plaster attached to and around slats of wood (called lathing) where it dried into a wall. The current technology uses large panels made of dry plaster like material called Dry Wall attached to wall studs by nail, screw or glue. Another name for Dry Wall is SheetRock. It should be kept dry. Once it gets wet, it loses its integrity and it is no longer viable. It is no longer Dry Wall or Wet Wall but it is Garbage. Dry wall would technically be wet wall anyways considering how you need liquid to be able to make it. BTW, I am an 8th grader from 2017-2018 and will be in high school from2018-2019.
Use a wet/dry vac then pull out the carpeting and let it air dry.
You leave it out in the sun or ask your mom
There are five ways in which a person can dry wet the carpet on a slab foundation. The five ways include sealing gaps, sealing the concrete, air to air exchange, use of the dehumidifier, and air conditioning.
If it is really soaked, you should use a carpet-cleaning machine to suck as much of the liquid out as you can. You could also step on the area with towels and get as much liquid out as you can. Then turn on a fan and point it at the wet area. It should be dry in a day or two.
The best vacuum to clean hardwood floors with is the wet and dry vacuum. It can easily switch from wet carpet to dry hardwood flooring. It can be seen on the website for Kohl's.
If you have experienced a water leak and the carpet is wet in the basement first determine if the carpet is glued down or if there is a pad underneath. If the pad is saturated it must be removed. If the carpet is glued down the water can be extracted thoroughly with a wet and dry vacuum cleaner to remove as much water as possible, and then you can place fans and a dehumidifier to completely dry the area. Be sure to remove any furniture from the wet area.
The available dry carpet cleaning products are dry carpet cleaner powder, dry carpet cleaner foam. dry carpet and upholstery dry foam shampoo and the whole dry carpet cleaner kit.
NOOO. It need s to be dry before the wall board goes up. There is a cellulouse insulation that sprays on with a glue but even that has to dry for a day. Wet insulation will cause mold on the wall board.
Use a gasket, like poly floor sill material, between them
There are several brands of inexpensive home carpet cleaners that have a wide range of wet and dry carpet cleaners and carpet cleaning accessories. A few of these are Comet, Currys, and the John Lewis Co.
It depends on what you need it for, Swiffers come in wet and dry so obviously if you have a carpet, the wet will be of little use but will work great for tiled flooring.