When filling a radiator from empty or if you suspect an air lock, you need to bleed the coolant system. On the passenger side of the radiator you will find a bleed point. There is another one on the heater pipes where they enter the bulkhead (firewall) Release both bleed points and fit a length of tube and a small funnel to the filler cap overflow point. Get a small plastic bag and a cable tie and seal the filler aperture.
Start to fill the system via the funnel and when coolant flows from the bleed points
close them. (The radiator will fill first)
When the coolant flowing from heater pipe bleed point is free from air bubbles the system is full. Remove the fill tube and plastic bag and run the engine until the thermostat opens. Check levels and replace the filler cap.
On the expansionbottle to the left of the radiator, its black.
Remove bellhousing from citroen xsara picasso
washer bottle location citroen xsara
just behind the radiator at front of engine. its located under a black plastic dome in an upright position.
Type of coolant Citroen Xsara 2
The Citroen Xsara was first produced in 1997. It was a joint production between Citroen and Peugeot and it remained in production until 2006. It had three versions.
how u do u remove a wheel bearing on a citroen xsara
g12
406litre
The cost for a cheap Citroen Xsara, would be around $1,000 in US currency. The Citroen Xsara seems like mainly a UK based car. Therefore, the prices varied from 750-3500 in UK currency.
The first Citroen Xsara Picasso was first produced from 1999 to the year 2010. From 1999 to 2008 it was manufactured in France by the company Citroen.
One can purchase a used Citroen Xsara Picasso from the Craigslist website. One can also purchase a used Citroen Xsara Picasso from websites like Auto Trader, Car Sales, Car Max and many more.