It should be marked on your distributor cap. Just find the wire next to the one and follow it to the cylinder.
It is the cylinder closest to the belt side of the engine.
On the 2. 3 L four cylinder , the # 1 cylinder is at the front of the engine and on the 3.0 L and 4.0 L V6 engines , the # 1 cylinder is at the front of the engine on the passenger side
Cylinder #1 is the drivers side front cylinder on the engine. Drivers side is 1-3-5-7 passanger side is 2-4-6-8.
If you look at the distributor of the car, sometimes they are marked with the cylinder number on the cap. Find number 1 and follow the spark plug cable to the spark plug. That will be No. 1 cylinder.
Driver's side, front.
Cylinder 1 is the first/front cylinder on the right side of the engine looking from the front of the car. That bank is 1-3-5-7 and the left bank is 2-4-6-8.
For the 2.5 4 cylinder, number one is the first cylinder from the passenger side.For the 3.5 V6 cylinder, number one is the first cylinder in back from the passenger the side.
1. Find the surface area of the whole cylinder 2. Find the area of one of the two circles on either end of the cylinder 3. Multiply the circle's area by two and subtract their area from the total surface area 4. Now you have the surface area of an unclosed cylinder!
It should be marked on your distributor cap. Just find the wire next to the one and follow it to the cylinder.
First cylinder up front on the passenger side.
A measuring cylinder(beaker)to find the height and then use the formula 1millimetre =1 cm3
the width of the cylinder