The owners manual will still which fuse it is amperage and the location.
hondahookup. has manual you can download
The Morris 1100 is basically the same wiring system as all BMC cars. It is a very straightforward wiring system with 3 fuses in total. If you are having problems sorting wires out, it is easier to open the loom up. With the lights you have a high beam lead, low beam lead from dip-switch to lights. The high beam will connect to the high beam dash light and the flasher switch on the indicator stalk. The main feed is from the light switch to the dip switch. Every item has a different colour: ie. Blue/Red for hi beam and Blue/White for low beam. Have you tried your local library?
try the fuses under the hood of the car
you have a short somewhere on that circuit. you need to find it and repair it.
I have an 05 Renault Clio and i can't seem to find how to even turn the side lights on?Any help?
Check the blade fuses for the interior lights. You can find them under the steering wheel if you open the glove box thing under the steering wheel. You need to remove the box, which will have the diagram of al the fuses on it. Packet of assorted fuses £2. If that doesn't work check the bulbs.
in the glove compartment, and the relays are under the tray in the glove compartment
Here you go http://www.peugeotlogic.com/fuses/fuses406/fuses1.htm
AnswerThe swicth on the shift selecter is bad. or check your fuses
Check fuses if there is one specific for the lights (not interior) Find it funny that both would burn out at the same time so would imagine it is in the switch.
I just replaced my bulbs and I also have the same problem. I have a 99 Toyota Camry and replaced with 7000k Xenon bulbs? Have you found the solution yet?I had the same problem with my 94 Nissan Pathfinder, the turn signal switch needs to be replaced. I didn't find this until all my lights went out including my dashboard and the low beam was the only lights working.
open fuse box, pull fuses until you find the one that is burned out. then replace that fuse. VOILA! brake lights work again. I think all dodges have a diagram of the fuses in the fuse box cover just find the brake fuse and replace it.