Inspect all hoses and tubes for cracks, cuts or breaks, listen for a sucking sound while the engine is running, this would indicate a leak, lastly spray some starter fluid or carb cleaner around a suspected leak area, if the engine races it is a trouble area.
Always make sure your fuel cap is sealing well, it is the most common evap leak area, if in doubt replace it.
any where
YOU WILL FIND IT MOUNTED ON A BRACKET UNDER THE TRUCK BY THE FUEL TANK
A wrangler car is another term for the Jeep wrangler. I was unable to find a specific listing for wrangler car that did not include the Jeep wrangler.
i have a 2000 buick century and the evap comes on where and what could be setten off the evap ?
Should be under the a/c evap on the passanger side under hood looks like a black ball
A P0442 indicates a EVAP System small leak. While this may be caused by a loose or worn gas cap, as is often the case, it usually points to 1 of 2 other problems. The "small leak" diagnostic indicates a leak as small as .020 inch in diameter which means it could be a leaking line within the evap system. It can also be a stuck open EVAP Vent Valve or a faulty Fuel Tank Pressure Sensor. This diagnostic has to be done by a shop with a scan tool capable of reading Tank Pressure voltage and/or performing a EVAP System Smoke test to find the leak.
find a 1996 wrangler first!
P0456 EVAP emission control system leak You'd probably need a smoke machine to find it, so leave this code for a dealership to fix.
i want to no how i can oprate my nvigation system on my qx4 2001 ples how i can play the navigation system on my qx4 2001 infinti car
AnswerAn Evap leak in a car is usually fuel fumes leaking from the evap system. The purpose of the system is to expel pressure built in the gas tank, collect the fumes, and then at the right moment, purge the fumes into the intake to be burned. On newer cars, a leak in the system will set off the check engine light. The leak doesn't have to be big... in fact, it can be tiny. As in, can't see with the naked eye, tiny. A smoke machine is usually used to find the leak. A popular cause of an evap code is a loose gas cap, as the gas tank and filler neck itself are part of the system.
You can find this at you local public library...........
It means you have a leak in the emmision evap control cannister system. So you are going to need to find the leak. I'll give you a little tip though that Amy save you some time. Check that the gas cap is on all the way. It needs to click three times when you put it on. If it doesn't it can give you a false reading in the evap system. Good luck.