0
you stick your tongue in the outlet and however many seconds you are shocked is how many rms are there
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What size amp do you need for 6 and a half Sony speakers that has 190 Watt peak power and 40 rms and Sony 6 by 9 speakers that has 300 Watt peak power and 60 rms?
200 RMS 4 channel or 2 channel so u know add the rms of the speakers to find the amp rms needed
What is the rms on a sony 1000w amp?
it would be a little over 700 rms
What will happen if you hook up a system and the amp rms is lower than the sub rms?
you could possibly kill your amp. because the subs are asking for a certain amount of power and your amp cant give the power. but typically the amp will push all its power avalible to the sub and you should be fine. but for the optimum sound system the amp rms should be the same or close to the sub rms.
Can you power a 1300 watt sub with a 1500 watt amp?
Yes, are we talking rms or max? If its rms you will have no problem. well the amp is a 1500 watt max but 350wx1 rms in 4 ohm
What amp do you use for a car subwoofer?
You must first check with the guide to your subwoofer. Either you can probably find it online , but you need to know the RMS wattage for the subwoofer. Than buy an amp that can put out the same number of watts and the RMS is for the subwoofer.
Okay so im buying two Kenwood 12 4-Ohm SingleVoice Subwoofer they have 400w rms each I kno amp rms has to equal subs rms Now my question is what type of amp am i looking for what about ohms?
Get a 1600 watt amp. The best amps are Rockford Fosgates.
What Size amp should I get for a 900 watt RMS subwoofer. Im not sure of the max power.?
the subs rms tells you what u need.. so a 900 watt rms sub would be best with an amp from 800-1000 watts
If your subwoofer is 350 watt RMS what watt RMS amp should you run it off?
biggest u can afford!
Does your amp need more watts then your subwoofers?
in the ideal situation yes. it doesn't have to be though as long as it's close to the high end of the rms, most of those statements in amp manuals that say that if you don't have more rms than the subs they will cause damage are just there to protect the company. Do NOT go with the max on either the amp and the subs, only use rms. it is good to have more. for instance, my subs max rms is 400, so an amp with rms of 475-500 would be perfect, depending on what kind of enclosure you have them in.
What amp goes best with 4 5.25 100 rms each kappas speaker's and 2 6x9 kappas 110 rms each would a kicker amp with680 total rms be to much?
Well the best route is a 400 watt 4 channel amp for 5.25's. Then a 200 watt 2 channel amp for 6x9's. Or any amp that is no more than 100 watts per channel.
Can a 350 watt amp power 2 10inch subs 250 watts rms each?
depending on your amps rms, i wouldnt suggest it.
What size amp do you need if your sub is 300 rms?
300 watts or less.
