There is a sticker under side of hood that specific engine for your car
10w30.
I need a diagram of the 1993Geo prism condition system.
it is right under the motor. it will be black with a bolt sticking out on the botom of it.
For my 94 Geo Prizm it's a 30mm.
if you can't find the plugs you have know business working on this car.
134a
Yes.
www.mem.com
they should I would measure really well first and be careful that the tank is empty
No. The Prism motor is a Toyota motor and side mounted. The Tracker motor(suzuki) is mounted with the engine from front to back, so it will not work without a lot(I mean a lot) of work to do it.
How do you replace power steering pressure hose on a 1993 geo prizm
Yes the Geo Prism has ait bags.
probly the blower motor
You need the radio unlock code in the radio manual
You can find a hood release cable for a 1991 Geo Prism at various auto part stores. You can also check with local salvage yards.
Yes it should have one located on the backside of the motor, under the intake.
under the car
According to the Haynes Manual- 0.031 inch gap
where is the fuel filter located on a 91 geo prism?
GM made a small car called the geo prism. GM Chevrolet or GEO
Begin by loosening the motor mount retaining bolt in your 1993 Geo Metro. Jack the engine up a few inches. Remove the retaining bolt and the motor mount bushing. Put the new bushing in and reverse the process.
You take the vehicle to a professional for repair. Working on the SRS can be very hazardous.
To replace the window crank handle on the 1993 Geo Prism, first remove the interior door panel. Then, access the screw that holds the window crank in place and remove it. You can then remove the handle itself.
No, custom fabrication is needed. Get a civic if you want drop ins.
Same answer as: "How do you replace a starter on a 92 Geo Prism LSI or GSI?" at this same site.