Sounds like fuel leak. Check the fuel lines from the gas tank and look for any wet spots. If nothing is found, it may be gasses venting from the fuel tank.
This is a fairly typical issue with 1995 villagers. There is a defective hose in the filler spout area that actually has a recall on it. Take your verhicle to the dealer and they should replace the defective part for free.
It took me a very long time to find this problem. Check the fuel hose connections to the fuel injector rail; they leak in cold weather. Tightening the clamps will fix the problem for a while. Replaceing the hoses and clamps is the long term solution.
http://www.autozone.com/servlet/UiBroker?UseCase=S001&UserAction=viewSimpleDiagInfo&Parameters=info
This is a very complex operation that is not possible to describe here. You will need to purchase a factory repair manual, that would be the only source for something this specialized.
every gasoline is... but they are maid up of fossil fules
every gasoline is... but they are maid up of fossil fules
Oil
natural resource
Automated Weather Source was created in 1992.
Gasoline is a Mechanical energy because gasoline can make cars move and cars are moving things.
It is a source of heat after combustion (oxidation).
petrol is synonymous to gasoline. so a petrol car is a car that uses gasoline as its source of fuel.
The source of energy for the non-hybrid automobiles is petrol or gasoline. The gasoline feeds into the combustion engine where it is actually the combustion that supplies the energy.
I would say you have a fuel leak. It can be at the fuel rail or any of the injectors or connections. This is a very dangerous situation. Have this repaired ASAP. A very slow leaking fuel system will not set the check engine light. http://www.autozone.com/servlet/UiBroker?UseCase=S001&UserAction=viewSimpleDiagInfo&Parameters=info
The source is Crude oil. Gasoline is extracted by heating cude oil and collecting the vapor at a specific temperature. The condensate is gasoline. The process is known as 'Cracking' and may have other chemicals added, to make the process more efficient.