0
MP=(d/L)*(1-(L-l)f)
where d would be the distance from the eye to the image without a lens
L is the distance from the eye to the new virtual image (with a lens)
l is the distance from the eye to the lens
this equation only covers a single lens (whereas there tend to be two in a microscope), but that's no worry; use it twice!
(i.e treat both lenses as independent sources of the image)
What else can I help you with?
Would a compound light microscope and dissecting microscope be used in the same lab situation?
Yes, it could. If one is working in a lab for the health department for example, both would be useful. One might have a sample and would use the low magnifying dissecting scope to find something of interest and then the compound 'scope for more detail of the it.
What lens on a microscope are used to locate the specimen?
To locate a specimen on a microscope, the low power objective lens is typically used, often a 4x or 10x magnification. This lens provides a wider field of view, making it easier to scan the slide and find the specimen. Once located, higher power objective lenses can be used for more detailed observation.
How many volt do you need if you have 12 led 3w and 700mA?
To find the total voltage needed for the LEDs, first calculate the total power by multiplying the number of LEDs by their power consumption: 12 LEDs * 3W = 36W. Then, divide the total power by the total current to find the voltage: 36W / 0.7A = 51.43V. Therefore, you would need approximately 51.43 volts for the 12 LEDs.
What are the reasons for always starting on low power for microscope?
The higher the power, the more difficult it is to have the item being viewed centered in the viewing field. However at lower power the viewing angle is wider and it is easier to find and position the item in the field. So we start by centering the item in the field at lower power, increase the power and center it again.
What type of microscope can be used to view non living specimens?
The light microscope and the electron microscope refers to the type of microscope that is used to view the non- living specimen. The non-living specimen is usually placed in a slide.
How do you find the total magnifying power of microscope?
To find the total magnifying power of a microscope, you multiply the magnification of the objective lens by the magnification of the eyepiece. For example, if the objective lens magnifies 10x and the eyepiece magnifies 20x, the total magnifying power would be 10x * 20x = 200x.
How Can you find the magnifying power of a microscope lens?
On each lens of a Microscope there is a marking that states the magnification power.
How will you find out the magnification of a microscope?
To find the magnification of a microscope, divide the magnification of the objective lens by the magnification of the eyepiece. The total magnification is the product of these two magnifications.
What power must be in place when you first find an image on a microscope?
idk
What power must be in place when you first find an image in the microscope?
You should first use the lowest power setting of a microscope to find an object and then center it within the viewing area. Then, when you switch to the next higher magnification, your target should still be close to the center and easier to find and focus on.
What has the author Julius Schwartz written?
Julius Schwartz has written: 'Magnify and find out why' -- subject(s): Microscope and microscopy, Nature study, Juvenile literature 'It's fun to know why' -- subject(s): Experiments, Juvenile literature, Science 'Through the magnifying glass' -- subject(s): Juvenile literature, Lenses, Nature study, Science 'Magnify and find out why' -- subject(s): Juvenile literature, Magnifying glasses, Microscope and microscopy, Nature study
Can you see molecules with a maginfy glass or a microscope?
No, molecules are too small to be seen with a magnifying glass or a regular light microscope. Specialized instruments like electron microscopes can visualize molecules by utilizing electron beams to probe their structure at very high magnifications.
What is the lens that is used to find the specimen on a microscope?
You use the low power lens to find the specimen with a microscope. Once you have found the specimen on low power, you can switch to high power for greater magnification. Just be sure to use only the fine adjustment knobs for focusing on high power so the high power objective won't hit the slide.
What is it called to make something bigger?
a magnifying glass a microscope glasses
Would a compound light microscope and dissecting microscope be used in the same lab situation?
Yes, it could. If one is working in a lab for the health department for example, both would be useful. One might have a sample and would use the low magnifying dissecting scope to find something of interest and then the compound 'scope for more detail of the it.
What is the power of the low power objective lens?
The low power objective lens helps to first fine the specimen or object being viewed, and to focus the microscope. Once the lens power becomes higher it is much harder to focus the microscope and find the desired object of viewing.
i want to buy a10x magnifying glass .from where can i get it?
I would try online store in wolf camera in order to find a magnifying glasses.
