0
You can't. You'd need to know density and height of rod.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you find the length of a rod given the diameter and the mass?
You cannot, there is no single-rule, formulaic relationship between mass and physical measurements like length or diameter.
What is a perch in length and width of land in feet?
A rod....5 1/2 feet
Does the period of simple pendulum depend on the mass of the bob?
Not in the theoretical world, in the practical world: just a very little. The period is determined primarily by the length of the pendulum. If the rod is not a very small fraction of the mass of the bob then the mass center of the rod will have to be taken into account when calculating the "length" of the pendulum.
How do you find the area of a rod?
If the rod has a radius of R and a length of L, then total area = 2*pi*R*(R+L) square units.
What is proper length of rod?
No specific clarity about rod
How do you find the length of a rod given the diameter and the mass?
You cannot, there is no single-rule, formulaic relationship between mass and physical measurements like length or diameter.
What is a perch in length and width of land in feet?
A rod....5 1/2 feet
Does the period of simple pendulum depend on the mass of the bob?
Not in the theoretical world, in the practical world: just a very little. The period is determined primarily by the length of the pendulum. If the rod is not a very small fraction of the mass of the bob then the mass center of the rod will have to be taken into account when calculating the "length" of the pendulum.
What happens to moment of inertia of thin rod when its length is doubled?
Since its length is doubled, the number of molecules present increase, resulting in an increase in mass of the rod. And we all know that mass is directly proportional to inertia, therefore the moment of inertia also increases.
What are the imperial units for length mass and weight?
Length:Inch, foot, yard, rod, furlong, mileMass:Pound-mass, poundalWeight:Ounce, pound-force, ton
What does mass per unit length denotes?
Linear mass density. You would use this for an object whose mass is uniform in two dimensions, like a rod or a flagpole.
Determine the volume of a steel rod which has a radius of 12.4 -0.5mm and a length of 243.3 -0.5mm?
radius=12.4+/-0.5mm length=243.3+/-0.5mm 1)length+width (12.4+/-0.5mm)+(243.3+/-0.5mm) (12.4+243.3)+/-(0.5+0.5) 255.7+/-o.1 2)length-width (243.3-12.4)+/-(0.5+0.5)mm 230.9+/-0.1
What is the definition to rod shaped bacteria?
Rod-shaped bacteria are bacteria that have a cylindrical shape, resembling a rod or cylinder. They are often referred to as bacilli and can vary in length and width. Examples of rod-shaped bacteria include Escherichia coli and Bacillus subtilis.
How do you find the area of a rod?
If the rod has a radius of R and a length of L, then total area = 2*pi*R*(R+L) square units.
What is formula for calculate the weight of round brass rod?
First, you need to know the mass of brass: Brass, Specific Gravity 8.56 lb per Cubic Foot (from wikianswers) second: you need to know the length and radius of the rod. formula: divide the radius of the rod by two square the answer you get (multiply it by itself) multiply by pi You have now calculate the area of the rod's end. multiply the answer by the length of the rod and you get the volume of the rod finally, multiply the answer by the specific gravity for brass. The answer is the weight of the brass rod NOTE: make sure you use the same units for length and mass throughout the formula. In the above example you will have to know the radius and length in feet to yield the weight in lbs. If you want to know the answer in a different unit (ounces for example) you will have to convert the specific gravity to correct units.
What is the length of hot rod?
The length of the movie Hot rod is 1 hour 28 minutes
What sizes are?
Window treatment measurements are given in width and length, with the width mentioned first. The length is measured from the top of the rod pocket to the bottom edge of the panel. When hung, the panel normally just reaches the floor or windowsill. To determine the number of panels needed for a window, the width of the window is multiplied by 1.5, 2, 2.5 or 3, depending upon the amount of fullness desired.
