Want this question answered?
It is the round connector, with a cover over it, about 6 inches left of and about at the same level as the hitch receiver.
Subarus all have a connector for a trailer wiring harness built in. There is a supplemental trailer harness that you purchase from your hitch supplier and it just plugs right in. Instructions are available on-line. This one is for a 2001, but they have been the same for a number of years.
A wiring diagram for the trailer hitch on a 98 Explorer can be purchased at your local auto parts store. A repair book for the make and model of your vehicle will have the diagram included in it.
The trailer wiring kit is available from Jeep at about $125 and plugs into a wiring connector accessible through a panel in the left rear (inside) fender panel (behind the spare tire, near the left rear turn signal) with the trailer wiring harness routed through a grommet in the bottom of the compartment
Trailer wiring harness part #118382 - any local Auto Parts Store should care this.
If you have a trailer hitch, check your light connector from underneath where the wires connect to the vehicle wiring. Looks like you may have a short.
Yes, but you need to have the correct trailer hitch and wiring installed. Talk to your local VW Dealer and they can help you with this.
under the car,behind spare tire,is the wiring harness with access plug for dodge trailer harness (optional) my came with 2012 journey
Some of the parts a Buick Rendezvous needs include ball mounts, custom fit vehicle wiring, hitch adapters and hitch balls. Other parts include hitch extenders, pintle hitches and trailer wiring and adapters.
I;m not sure what you mean my 'control unit', but the trailer wiring connects into a connector behind the trim on the driver's side rear panel (where the jack is and the storage net for the head rests).
Try U-Haul they may have a kit with instructions
http://fawgame.com/?rf=41726368616e67656c this is maybe