Want this question answered?
open the hood and take the screw out that holds the strap which wraps around the glove box. Remove the glove box and set aside in the hood area being careful not to break the plastic hood cable tube. You will be able to see where the glove box latch spring tab is keeping the door shut. Squeeze the latch and push to open the door. Replace the lock assembly by removing the large nut on back of the glove box door and reinstall new one. align the door properly with the 4 phillips screws on the door and trial fit. Once it works properly reinstall the glove box and strap.
so u can have 1 key for both
what one
the rover 75 comes with the ftg unit inside the glove box. just unscrew the panel below (2 screws) and you will find the connector that plugs straight in and then feed it into the glove box (which is were your CD multi will be housed) when you get it.
take out the glove box lock or door lock as there more easy to build a key round compared to the ignition barrel and also quicker to remove/refit take to a lock smiths and they will build a key to fit, if you have an immobilizer its a dealer job if you cant get a decent locksmiths to make a key get a lock set from the scrappys, (might be a cheaper option than a key build)
A 375 ml bottle is called a mickey because it is small enough to fit in the glove box or sometimes also called a mickey box of your vehicle.
It is located under the glove box , first open it , than see upwards in it , it"ll be there . Replace it or clean it and than fit it again .. Thats it .And for those of you , who donot know what is glove box , it is the box in dashboard in which we keep our useful things , normally in front of passenger seat
bring it to your local mechanic
She put on her leather glove before stepping outside into the cold.
how long to fit heater matrix for citreon relay
yes :P
It's really easy. Just push in the glove box from both ends until the hinge can be released. Let the glove box hang down and you will see the air filter. No tools are necessary, and not much force is required. You can buy a cabin filter for less than $20.