In order to "fix" something, it would be very helpful to know in what way is it "broken"(??)
For example...
Is the assembly & lens
Rephrase the question and relevant help & information should be forthcoming
The 1996 Ford Taurus heated oxygen sensor can be found behind the dashboard on the passenger side of the passenger compartment. The oxygen sensor should be labeled as such.
Check out the question below regarding headlights - it contains detailed instructions on removing the headlight assembly - which happens to be the best/easiest way to change the bulb. And the Owners Manual also has illustrated instructions also. See "Related Questions" below for more
facing the passenger side of engine
It is at the rear of the headlamp assembly where the wires are.
You have to replace the entire headlight assembly not just the cover.
It is on the passenger side, right above the headlight.
Ask at an auto parts store.
ou have to remove the headlight assembly by removing the two screws on top and pull out the assembly. The screws will be long. After you remove the headlight assembly there is two sets of wires one for your turn signal and one for your headlight grab a hold of the headlight up close to the assembly and turn it. when you have turned it enough it should be able to come out then you put the new bulb in and reinstall everything.
No, they are part of the headlight assembly.
Changing the assembly is pretty much the same as the procedure for replacing the bulb. Luckily Ford provides detailed and illustrated instructions on doing this in the Owners Manual. If yours isn't handy, or you like an electronic version for the computer, checkout the Related Question below for where to find one for free download. Also see "Related Questions" below for helpful user-provided information on removing/installing the headlight assembly.
The headlight bulb on a 1996 Jaguar XJ6 is replaced by disconnecting the wiring harness and twisting the bulb assembly. The bulb can then be pulled from the lenses and a new bulb put in place.
headlight must be replaced as an assembly bulb can be replaced by turning and pulling