Most likely, you have a worn speedometer gear. The gear is located on the rear right side of the transmission tail housing. A black plastic sensing unit screws onto a metal receiver that contains the gear. The metal receiver is held in place with a bolt and metal retainer. You will notice that the retainer has a flat edge that indexes on the metal receiver, and the metal receiver has two flat edges. Remove the bolt and retainer, and rotate the receiver so the metal retainer indexes on the other flat edge. This will index the gear in a new location where it is not worn. If this does not fix the problem, your sensing unit may be defective.
Yes
Pull codes for 2001 isuzu rodeo
Could be in the trany sensor/gear or the speedo itself
labor cost for an new oil pump an a Isuzu rodeo 2001
how do you adjust head ligths up or down on a 2001 Isuzu rodeo
Yes, but you don't want the 2001 engine, it has more issues than the 1999 engine.
Yes, but you don't want the 2001 engine, it has more issues than the 1999 engine.
diagram for timing belt Isuzu rodeo 3.2l 24valve
how do you change the serpentine belt on a 2001 Rodeo
help
by changing the time
it will fit but you will have to get new hoses for the correct sizes