P0340-CAMSHAFT POSITION SENSOR CIRCUIT, The cam sensor is the pick up plate in the distributor.
Replace the cam sensor
Test/replace the cam sensor.
Test/replace the cam sensor.
You have a circuit problem on the camshaft position 1 sensor.
I have a 340 code replaced the crank sensor 3 times replaced the cam position sensor still did not fix it the Dakota runs fine but when it gets warm it will not start until it cools off.
55 code is not an error code, it signals end of codes. If no other codes preceded it, you have no error codes.
on my 1997 infinite Q45 i have the code 1320 how do i fix it?
A 1997 Dodge Ram doesn't have a EGR valve.
You replace the torque converter.You replace the torque converter.
55 means end of message. Any other codes are the ones to fix.
The Dodge Stratus was produced from the years 1995 to 2006. The best way to fix the P0513 code in a Dodge Stratus is to disconnect the negative terminal and then reset the ECM.
The code P0340 indicates that the control computer detected a problem with the camshaft position sensor CIRCUIT. Since the code indicates that it's the circuit, there could be a problem with the sensor, the wiring or the PCM. If you just replace the CPS, you may not solve the problem, especially if it's a wire, connector or the control computer.