0
I depends. It's either a sensor, it's wiring, or potentially the control card. Or it may be caused by wrongly positioned mechanisms of the main shaft.
David Ricar
Add your answer:
Earn +20 pts
What does code 321 on a tajima embroidery machine mean?
how to fix tajima 321 error
How do you fix an error code 311 on a tajima embroidery machine?
The manual said to check the belt and sure enough it was broken in half. Unscrew the panel on the left hand side of the machine, where you put the allen wrench in to manually turn the needles up and down. The belt is right there. $110.00 to replace.
What does the error code 311 mean on a Tajima?
The 311 code can mean 2 things. It can mean that there is an encoder status that has not changed in 5 seconds. To fix this, check the line systems. It can also mean that there is a motor or belt failure.
What is the Xerox error code 010-315 and 091-312?
You can get the error codes 010-315 and 091-312 on your device, and they indicate the fault with the fuser latch contact and the fault with the HVPS CC, respectively. If you want to fix these error codes on your device, then the steps you need to follow are below. These are some easy solutions you can try to fix error code 010-315: • Reseat the fuser drawer (transport/duplex drawer) • Ensure that the fuser drawer magnets are tight and straight • Power the machine off and then on again (partial reset or full reset) • Make sure the door is closed securely In addition, you need to follow the below steps if you want to fix the error code: • Power the machine off and then on again • Replace the drum cartridge (Xerographic Module) Apart from fixing the error using the above-mentioned solutions, you can also connect to the printer experts to resolve the problem from your Xerox printing machine.
How do you fix a High Speed Slot Machine error code Need Clear?
If you own a Pachislo Slot Machine you WILL have to reset your machine eventually. Error codes will prevent you from playing your machine and without resetting it will be stuck with an error code... forever!...
How do you fix a 211 error on a Tajima Neo embroidery machine and you cannot get it to reset Help?
First, return the main shaft to the fixed position, then check the encoder signal by moving the little wheel with all the degrees on it to the RED area. If this does not correct the problem, contact the manufacturer.
Engine code P0456?
P0456 EVAP emission control system leak You'd probably need a smoke machine to find it, so leave this code for a dealership to fix.
How fix code P1140 Nissan Sentra?
How fix code P1140
How do you fix code p1140 and 1145?
how fix Code P1140 fuel air
How do you fix engine code p0449?
Here is a video on how to fix engine code p0449
How do i fix apple Error code 1712?
How do I fix error code 1712 for Mac?
What is wrong when a message blinking code exp in accu chek performa?
It means that something is wrong with the machine. You can check the manual in order to find out to fix the issue with your product.
