To fix a digital dash in a 1988 Chrysler LeBaron, first check the fuse related to the instrument cluster, as a blown fuse can cause the display to malfunction. If the fuse is intact, inspect the wiring and connectors for any damage or corrosion. You may also need to remove the dash to access the circuit board; if there are signs of damage, you could attempt to repair solder joints or replace faulty components. If the issue persists, consider consulting a professional or looking for a replacement dash unit.
To remove the dash in a 1988 Chrysler LeBaron, start by disconnecting the battery to ensure safety. Next, remove the screws and clips securing the dash panel, which may include those around the instrument cluster, center console, and any air vents. Carefully detach any connected wiring harnesses and remove the dash assembly from the vehicle. Consult a repair manual for specific details and diagrams to assist with the process.
It is the electronics that control the dash, it's either the whole unit, or something small like a loose plug, or a wire. This happened to me on a 1995 Lincoln contennital.
Yes but you might have to get the bcm off the car you are taking the dash out of. I have a 91 Lebaron convertible that came from factory with the digital dash.
no it will not i was working on one for a dughters first car and she wanted a digi dash the components for the digi doesnt exsist sorry
On my 1986 Chrysler lebaron the fuse box is located in the glove box.Open the glove box and on the right hand side of it is a fuse panelAnswerOn most cars, the fuse box is located under the dash near the kick panel on the driver's side.
Inside the dash, in the hvac housing. The dash and hvac housing need removed to access.
To get a 1990 Chrysler LeBaron digital dash repaired, you can start by checking with specialized automotive repair shops that focus on classic or vintage car electronics. Online forums and communities dedicated to Chrysler vehicles may also provide recommendations for reliable technicians. Additionally, consider reaching out to companies that specialize in instrument cluster repairs, as they often have the expertise to handle such issues. Lastly, eBay or similar platforms might have listings for refurbished parts if a replacement is necessary.
The scanner plug in is under the dash on the drivers side and is the OBD1 system
If the dash lights on your 1988 Chrysler LeBaron are not working, first check the dimmer switch, as it may be turned all the way down. Next, inspect the fuses related to the dashboard lighting; a blown fuse could be the culprit. If both are functioning properly, the issue might be with the bulbs themselves or a wiring problem, in which case further diagnostic work would be needed.
under passenger side of dash behind right side kick panel just in front of the bottom of the door
4 inch in the dash 6 inch in doors and back 4 inch in the dash 6 inch in doors and back
You could have shorted it out. I have a digital instrument cluster that has shorted out in the displays and the rest of the dash went with it. I've been looking for a replacement for 4 years and still haven't found one. Good luck.