Want this question answered?
About 10-20 mph. It matters what gear your in.
Have to heat the hub with a tour . Use wd40 and wedges between mower housing and stump jumper. loosen the castle nut untill you have 1/4" under it and the seat. Then hit the nut to loosen the tapered spindal. It's usually stuck fast
I cant seem to get the new pinion gear to go on the drive shaft of my John Deere LA105. Is there a trick to it?
my2010 l200 warrior has stuck in gear with no warning wot can it be
why is my 1996 Mitsubishi lancer evo stuck in gear
What to do when the gear is stuck in park on a Honda 2001
Check your belts they might be too short or your blades are stuck in gear or your starter might be faulty.
why is my 2006 Nissan altima gear shift stuck in park
I have been looking for a wiring diagram for 2 months and still no luck. If you find one, please email me at nemolilo@comcast.net
Gears are worn
If the tires are moving in opposite directions when you try to move the mower there is one of two things happening. Either the mower is stuck in gear or the brake is hanging. The more common is that the brake is hanging. If you can, have someone on the mower with it NOT running. Have them press down the brake pedal while you are watching under the mower and on the rear axle. There is a rod that goes to the brake assembly. The rod is pushing the brake linkage. Usually the bracket is stuck. You can pull it back forward and the brake will release. If it happens frequently you will need to lubricate the linkage without getting any lubrication on the brake discs themselves.
That could be considered a trick question. The answer is none. The 240 and 260 were both gear drive; the 245, 265, 285, and 320 were hydros. All were made in the 1990's.